3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS is our low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Non-Sag with Excellent Impact Strength
Making work safer, faster, and more efficient, that's just a few of the benefits of our 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS. With a 10:1 mix ratio and a 10-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 21 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.
Recommended Applications
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS Green and Gray have been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS Gray should yield similar results as 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS Green, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C, and Boeing BSS 7239 test methods
Adhesive Type | Acrylic |
Applications | Impact Resistance |
Brands | Scotch-Weld™ |
Container Size (Metric) | 45 mL |
Design Challenges | Impact & Shock Absorption, Noise Vibration & Harshness Control NVH |
Industries | Aerospace, Appliance, Automotive, Construction, Consumer Goods, Electronics, General Industrial, MRO, Metalworking, Military, Signage, Specialty Vehicle, Transportation, Woodworking |
Open Time | 10 min @ 72 °F (22 °C) |
Performance Level | Best |
Physical Form | Flowable Liquid |
Product Form | Each |
Shear Strength at 72 Degrees F (22 Degrees C) | 3600 psi |
Storage Temperature (Celsius) | 22℃ |
Surface Type | Oily, Smooth |
Units per Case | 12.0 |
Volume (metric) | 45 mL |
Work Life | 8 - 12 min |
Safety Data Sheets
Document Number: MSDS_3437340_NZ_EN
(PDF , 0B)