1. New Zealand
  2. All 3M Products
  3. Personal Protective Equipment
  4. Respiratory Protection
  5. Reusable Respirators
  6. Cartridges & Filters
  7. 3M™ Particulate Filter 2138, P2/P3, with Nuisance Level Organic Vapor Relief, 100 EA/Case

3M™ Particulate Filter 2138, P2/P3, with Nuisance Level Organic Vapor Relief, 100 EA/Case

  • 3M Product Number 2138
  • 3M ID 7000029914

Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure

Made from 3M high performance filter media for effective filtration efficiency

Lightweight and provides low breathing resistance

View more details

Details

Highlights
  • Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure
  • Made from 3M high performance filter media for effective filtration efficiency
  • Lightweight and provides low breathing resistance
  • Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series

Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. **Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: - With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) - With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES - Organic compounds with low vapour pressures - Ozone up to 10 x WES - Offers relief from acid gases and organic vapours at levels below the WES

Typical Properties

Aerosol Type

Oil & Non-oil

Brands

3M™

Cartridge or Filter Assigned Colour Coding

N/A

Cartridge or Filter Rating

GP2/GP3

Cartridge or Filter Type

Particulate

Connection Type

Bayonet

Filter Class

P3 R

Filter Type

Gas, Vapor & Particulate Filter

Nuisance Odor Relief

Organic Vapor & Acid Gas

Product Series

2000 Series

Product Type

Particulate Filter

Respirator Compatibility

3M™ Full Facepiece 6000 Series, 3M™ Half Facepiece 6000 Series, 3M™ Half Facepiece 6500QL Series, 3M™ Half Facepiece 7500 Series

Specifications Met

Complies with AS/NZS 1716:2012

Resources