3M™ Tape Primer 94

  • Options available
  • | Select product options for IDs.

Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates

Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing

Can be applied with brush or swab for small areas and a pressurised flow gun for larger areas

View more details
icn_down_arrow

Select product options

Details

Highlights
  • Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
  • Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
  • Can be applied with brush or swab for small areas and a pressurised flow gun for larger areas
  • Dries to a clear finish
  • Cleans up with isopropyl alcohol

3M™ Tape Primer 94 is an adhesion promoter for use in conjunction with 3M™ VHB™ Tape.

Dries in Minutes for Efficient Use
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape.  It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape.  Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.

Recommended Applications

  • Promote adhesion of 3M™ VHB™ Tape
  • For use on many plastic, rubber, painted and bare metal substrates

Application Tips
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.

Typical Properties

Application Temperature-Environment (Metric)

15°C - 27°C

Brands

3M™

Clean-up

Acetone

Composition

Solvent Based

Full Cure

2 min

Industries

Construction, Electronics, General Industrial, Metalworking, Signage, Transportation

Net Weight (Metric)

0 kg, 0.27 kg, 0.96 kg

Physical Form

Liquid

Product Form

Can, Each

Product Type

Primer

Shelf Life in Months (from date of manufacture)

18

Storage Temperature (Celsius)

15°C - 27°C

Surface Type

Metal, Plastic

Units per Case

12.0,1000.0

Volume (metric)

0.95 L, 66 mL, 236 mL, 946 mL

Overall Height (Metric)

1.02 cm, 7.3 cm, 12.7 cm

Overall Width (Metric)

8.13 mm

Resources

Safety Data Sheets

Document Number: MSDS_0682435_NZ_EN

(PDF , 0B)

Safety Data Sheets

Document Number: MSDS_0709253_NZ_EN

(PDF , 0B)