3M™ 8560 Series Cold Shrink Cable Breakout Boots
- | Select product options for IDs.
Details
Highlights
- Simple hand application with no need for special installation tools
- Versatile as it installs quickly and accomodates a wide range of cable sizes
- No torches, heat,specific user skills or craftsmanship required
- Excellent resistance to ozone and ultra-violet radiation
- Good solvent resistance as its compatible with industry approved cable cleaners
- Excellent thermal stability
- High dry and wet insulaton resistance
- Highly flexible as it accomodates all power cable supplier bend radius recommendations
- Seals tight whilst retaining resiliency and pressure even after prolonged years of aging and exposure
3M™ 8560 Series QT-III Three Core Cold Shrink Cable Silicone Breakout Boots are a series of open-ended molded rubber sealing assemblies that are factory expanded and mounted on removable inner supporting plastic cores. They are supplied for field installation in a pre-stretched condition.
The supporting cores are removed after the seal has been positioned for installation around the breakout area of a 3/C (three conductor) cable. Core removal allows the silicone rubber boot to shrink down to a pre-determined diameter, creating an environmental enclosure for indivudal cable phase legs and the overall cable jacket.
Typical Properties
| Colour | Grey |
| Dielectric Strength (V/mil) | 587 V/mil |
| Elongation | 780 Percent |
| Inner Diameter After Shrink (Metric) | 37.08 mm, 64.01 mm |
| Inner Diameter Before Shrink (Metric) | 67.82 in, 109.73 mm |
| Material | Silicone |
| Maximum Voltage Rating | 35 kV |
| Model | Cold-shrink |
| Outer Diameter After Shrink (Metric) | 15.49 mm, 25.9 mm |
| Outer Diameter Before Shrink (Metric) | 24.13 mm, 41.4 mm |
| Shrink Type | Cold Shrink |
| Temperature Rating | 356°F (180°C) Class H |
| Transition Type | 1 - 3 Breakout |
